5. Copier
40
“5.2.1 Collate copy”, page 39). The unit will make 1 set of
a collated copy and stop temporarily so you can check
whether the copy was made as you expected. If the copy
is correct, press {Start} to continue copying.
If the copy is not correct, press {Stop} and start again
from the beginning.
5.2.2 Duplex feature
The following types of copies are available:
– 1-sided originals to 2-sided copies
– 2-sided originals to 1-sided copies using the
automatic document feeder
– 2-sided originals to 2-sided copies using the
automatic document feeder
You then need to select the binding for originals and/or
copies.
– Long edge
– Short edge
LA4, letter, legal, 216 mm × 330 mm or 216 mm × 340
mm size recording paper (plain and thin) can be
used.
LDuplex copy is not available for the quick ID copy
feature (page 41), easy repeat feature (page 41) or
poster feature (page 41).
To make 1-sided originals into 2-sided copies
1. Set the original (page 21).
2. Press {Duplex}, and press {V} or {^} repeatedly to
select “1-Side/2-Side”. i {Set}
3. Press {V} or {^} repeatedly to select the desired
binding setting for copies.
–“→ Long Edge”
–“→ Short Edge”
4. {Set}
5. If necessary, enter the number of copies (page 37).
LOther copy settings are also available. See page
37 for details.
6. When using the scanner glass:
1. {Start}
LThe unit will scan 1 page.
2. Place the next document on the scanner glass
and press {Set}.
LThe unit will start copying.
When using the automatic document feeder:
{Start}
7. After you finish copying, press {Stop} to reset this
feature.
Note:
LYou can save the previous duplex setting (feature
#470 on page 73).
To make 2-sided originals into 1-sided copies
(automatic document feeder only)
1. Set the original (page 22).
2. Press {Duplex}, and press {V} or {^} repeatedly to
select “2-Side/1-Side”. i {Set}
3. Press {V} or {^} repeatedly to select the type of
originals.
–“Long Edge →”
–“Short Edge →”
4. {Set}
5. If necessary, enter the number of copies (page 37).
LOther copy settings are also available. See page
37 for details.
6. {Start}
7. After you finish copying, press {Stop} to reset this
feature.
To make 2-sided originals into 2-sided copies
(automatic document feeder only)
1. Set the original (page 22).
2. Press {Duplex}, and press {V} or {^} repeatedly to
select “2-Side/2-Side”. i {Set}
3. Press {V} or {^} repeatedly to select the desired
setting for originals and copies.
–“Long → Long Edge”: For long edge originals
to long edge copies
–“Long → Short Edge”: For long edge
originals to short edge copies