
5. Copier
37
5CopierCopy
5.1 Making a copy5.1.1 Using the scanner glass
1If the {Copy} light is OFF, turn it ON by pressing
{Copy}.
2Set the original (page 21).
3If necessary, change the copy settings according to
the type of document.
LTo change the number of copies, see page 37.
LTo select the contrast, see page 37.
LTo select the resolution, see page 37.
LTo select the zoom rate, see page 37.
4{Start}
LIf the copy input tray prompt (feature #471 on
page 74) is activated, select the desired
recording paper size by pressing {<} or {>}
repeatedly, then press {Start} again.
LThe unit will start copying.
5After you finish copying, press {Stop} to reset the
settings you set in step 3.
Note:
LTo stop copying, see page 85.
LYou can change the default operation mode (feature
#463 on page 66) and the timer before returning to
the default operation mode (feature #464 on page
66).
LIf the {Fax Auto Answ er} light is ON, the unit can
receive faxes automatically even when in the copy
mode.
To change the number of copies
1. Press {V} or {^} repeatedly to select “Copies”.
2. Enter the number of copies (up to 99).
3. {Set}
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
1. Press {V} or {^} repeatedly to select “Contrast”.
2. Press {<} or {>}. i {Set}
Note:
LYou can hold the previous contrast setting (feature
#462 on page 65).
To select the resolution
1. Press {V} or {^} repeatedly to select
“Resolution”.
2. Press {<} or {>} repeatedly to select the desired
resolution.
–“Text/Photo”: For both text and photographs.
–“Text”: For text only.
–“Photo”: For photographs, shaded drawings,
etc.
3. {Set}
Note:
LYou can change the default resolution (feature #461
on page 73).
To select zoom rate (enlargement / reduction)
1. Press {V} or {^} repeatedly to select “Zoom”.
2. Press {<} or {>} repeatedly to select the zoom rate
that fits the size of your document and recording
paper.
–“100%”
–“50%”
–“200%”
LYou can enter the desired percentage from
“25%” to “400%” specifically by using the dial
keys.
LAdditional zoom rates can be selected according
to the recording paper size setting (feature #380
on page 65 or feature #382 on page 65).
{Set}{V}{^}{<}{>}
{Copy}
{Fax Auto Answer}{Stop}
{Start}