Notes on Use

Usage locations

Printer usage location

Do not use in the following locations:

Locations subject to a lot of dust or lint, as this may lead to inability to print cleanly.

In direct sunlight, near an air conditioner, or in any other location where temperature may rise above 35 °C (95 °F) or fall below 5 °C (41 °F). There is a risk of causing malfunction, deformation, or damage to the printer.

On a piano or a carpeted surface. There is a risk of causing damage or discoloration.

Where it can be exposed to tobacco smoke. There is a risk of causing the printer to malfunction.

Keep away from magnetic and/or electronic hardware.

In order to prevent adverse electromagnetic effects, be sure to operate as far away as possible from the following type of appliances.

Mobile phones, microwave ovens, electronic game units and stereo speakers.

Do not use the printer vertically. This may cause the printer to malfunction.

If the printer’s inner components overheat

When the ambient temperature is high or when continuous printing has been performed, printing operations may temporarily halt in order to keep the internal temperature of the printer from rising. Printing will automatically resume when the internal temperature of the printer goes down. Ensure that the printer is used in a well-ventilated location.

When ambient temperatures are low

To maintain high quality image output, the printer does not begin printing until the internal temperature has warmed up, so it may take some time before printing starts. Printing starts automatically once the temperature has risen sufficiently.

To prevent the printer deformation and keep the case finish

Do not spill or allow any volatile solvents, such as benzine, paint thinner, or other solvents or insecticide to come in contact with the printer. Also, do not maintain contact with the printer by rubber or vinyl-coated materials for an extended period of time. This may damage the surface of the printer or cause the case finish to peel.

Required space during printing

Paper is ejected and inserted from the rear panel of this printer during printing.

Do not place any objects within 220 mm (8.7″) of the rear panel of the printer. Use the printer on a flat surface, not doing so may lead to paper jams.

Top view

Paper cassette

220 mm (8.7″)

Before Use

Continued on next page

9

Page 9
Image 9
Panasonic KX-PX2M operating instructions Usage locations