21
Cordless Telephone
Handset Settings
: Display Option

Selecting the Talk Mode Display

Even if you select "PHONE NO", the other party’s phone number will not appear on your
display when you receive calls.

Selecting the Display Language

•To exit the operation, press any time.
•If "F43 00" is selected, the Command Interface will be displayed instead of
a language. Each menu will be displayed as an alphanumeric code.
The Command Interface codes for each menu item are shown on page 28.
*1You can select one of 10 languages. If you set a language you cannot read, reset the
handset to its initial settings.
Press MENU DOWN RIGHT UP RIGHT 4-digit Handset PIN UP OK.
All handset setting will be reset to their initial settings (p. 26), however, the Phonebook
data will be saved.
Before programming, please follow steps 1 to 3.
Press MENU. Search/Select
"DISPLAY OPT".
Search/Select
"SETTING HS".
12 3
Search/Select
"TALK MODE".
Search/Select
"TALK TIME"(Length of the call) or
"PHONE NO"(Phone number).
45
Search/Select
"LANGUAGE".
Search/Select
desired language.*1
45
400AL_e_03.fm Page 21 Monday, August 25, 2003 8:13 PM