515NL_e_04.fm Page 64 Wednesday, July 23, 2003 10:59 AM
Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing 
. If
over 1 minute, press 
then start over again.
To exit the operation, press 
at any time.
1 | Press JOYSTICK | 2 Select “ |
| Setting | 3 | Select | |||
| |||||||||
| (or move). | Handset | ”. |
|
|
|
| “Registration”. | |
|
|
|
|
|
|
|
|
|
|
4 Select “Register H/set”.
6 Select the desired base unit.
5 Press and hold 
on the Base Unit (for about 3 seconds) until the tone sounds.
•If all registered handset(s) start ringing (paging), press 
to stop paging then start over again.
7 PIN.Enter | 8 Press JOYSTICK. | ||
(Factory Preset 0000) |
|
|
|
When a handset is registered successfully, a confirmation tone sounds and the 
icon is displayed.
•If you enter the incorrect Base Unit PIN, an error tone sounds and repeat from step 1.
•The handset main menu may change corresponding to the base unit registered to.
64
