Panasonic KX-TCD515NL operating instructions Automatic Route Selection, Storing the Carrier Code

515NL_e.book Page 59 Tuesday, July 15, 2003 1:53 PM

Base Unit Settings

Automatic Route Selection

Automatic Route Selection is a feature which selects the least expensive carrier (network) service available, when making long distance calls.

When area code(s) have been related to carrier code, you will need only dial the area code, the lower costing carrier (network) will automatically be dialled.

Please contact your telephone company regarding the carrier telephone charges.

Storing the Carrier Code

Firstly you must subscribe to a second carrier (network) service. Then store the code as follows:

Follow steps 1 to 4 on page 57, then:

5	Select “Set ARS”.	6 Select “Set	7 Select “On”.
		Carrier”.
8	Enter Carrier Code.	9 Press JOYSTICK.
	(max. 7 digits)

•To turn the feature off, select “Off” in step 7.

Storing the Area Code(s)/Country Code(s)

Store the area code(s) for which the chosen carrier (network) service charge rates are higher than the original carrier (network) service. Up to 25 area codes can be stored. If you do not store any area codes, all phone numbers will be dialled with the second carrier code.

Follow steps 1 to 4 on page 57, then:

5	Select “Set ARS”.	6	Select “Set Area	7	Select the desired
			Code”.		Area Code Number
					(1-25).
8	Enter Area Code.	9 Press JOYSTICK.
	(max. 5 digits)

59

Cordless Telephone