Panasonic KX-TCD515NL Select Call Option, Selecting the Recall Time, Selecting the Pause Time

515NL_e.book Page 57 Tuesday, July 15, 2003 1:53 PM

Base Unit Settings

Call Options

To exit the operation, press at any time.

1	Press JOYSTICK	2	Select “	Setting	3	Enter 4-digit Base
	(or move).		Base”.			Unit PIN.
						(Factory Preset 0000)
4	Select “Call Option”.
						Go to step 5.

Selecting the Recall Time

You can change the duration of the recall time depending on the requirements of your Network provider or PBX.

Follow steps 1 to 4 shown above, then:

5 Select “Recall”.	6 Select “Type 1” (700 ms), “Type 2” (110 ms) or
	“Type 3” (200 ms).

•The factory preset is “Type 2” (110 ms).

Selecting the Pause Time

You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.

Follow steps 1 to 4 shown above, then:

5 Select “Pause Time”. 6 Select “Short” (3 sec.) or “Long” (5 sec.).

•The factory preset is “Short”.

57

Cordless Telephone