515NL_e.book Page 66 Tuesday, July 15, 2003 1:53 PM
Multi-Unit User Operations
Base Unit Selection
When “Auto” (Automatic Base Unit Selection) is selected, the handset automatically searches for other registered base units if you move outside of the radio range of the current base unit.
When a specified base unit is selected, the handset will access that base unit only. Calls (both incoming and outgoing) can be conducted only via the selected base unit, even if the radio cells overlap with neighbouring base units.
To exit the operation, press 
at any time.
1 | Press JOYSTICK (or move). | 2 | Select “ | Setting Handset”. |
3 | Select “Select Base”. | 4 | Select “Auto” or the desired base unit. | |
Intercom Between Handsets
You can use your handsets as a
Intercom calls can be conducted within the radio cell of the current base unit, but not with units in neighbouring radio cells.
To exit the operation, press 
at any time.
For example, when Handset 1 calls Handset 2:
1
2
<Handset 1>
Press INTERCOM 
, then press the desired handset number 
.
<Handset 2>
Press TALK 
.
•You can also answer a call by pressing 
, 
to 
, 
, 
or 
instead of pressing 
(Any Key Talk).
Terminating a Call
<Handset 1 or 2> | 3 Press TALK OFF | . |
66
