Panasonic KX-TD7590CE operating instructions Selecting Automatic Answer Delay

PS PROGRAMMING (CONT.)

Selecting Automatic Answer Delay

You can select how many seconds the ringer rings before automatically answering calls when using the headset. This program is displayed only when “Setting the Automatic Answer Mode” is set to “INT/CO” or “INT ONLY”. (default: 6 seconds)

Display example

AUTO ANS DELAY 6s

CHANGE=SELECT

NOTE:

•If you set “INT/CO” or “INT ONLY” to the Automatic Answer Mode (PS programming) and connect the headset, your phone will answer incoming calls automatically. If you leave your PS unattended with the headset connected, the following problems will occur.

1.The PS will answer calls and the calling party will be charged even though you are not there to take the call.

2.Even if the calling party disconnects the call, the DECT line will remain connected until you disconnect the call manually or the battery expires. This occurs depending on the line. The PBX trunk may also remain connected to the network. Please note the following;

a)Please set “INT/CO” or “INT ONLY” to the Automatic Answer Mode only when necessary.

b)If you are using the “INT/CO” or “INT ONLY” setting in the Automatic Answer Mode and you take off the headset, pull the headset jack out.

26