Panasonic KX-TG2314 manual Programmable Settings Ringer Tone Handset, Or B

Programmable Settings

Ringer Tone Handset

You can set the handset ringer to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”.

•You cannot change the ringer tone for intercom calls.

•If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

•If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

—the caller hangs up before you answer the call, or

—another person answers the call using another phone connected on the same line.

1Press [MENU].

2	Scroll to “Ringer setting” by pressing [d]
		Ringer setting
	or [B], then press Select.	KBack dB SelectL
3	Scroll to “Ringer tone” by pressing [d] or
		Ringer tone
	[B], then press Select.
		KBack dB SelectL
4	Select the desired ringer tone by pressing [d]
		Ringer tone
	or [B].	1:Tone 1
	• The handset will ring and the ringer tone will	KBack dB SaveL
	change. If the ringer volume has been turned off,
	the handset will not ring (p. 15).
	• You can also select the ringer tone by pressing [1]
	to [7].
5	Press Save, then press [OFF].

16