Panasonic KX-TG2314 manual Special Features Flash Button Handset, Incoming Call Tone Handset

Special Features

FLASH Button Handset

Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting.

•Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the mute (p. 42).

Selecting the flash time

The flash time required depends on your telephone exchange or host PBX. You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)”. The factory preset is “700 ms”.

•If PBX functions do not work correctly, consult your PBX supplier for the correct settings.

1Press [MENU].

2Scroll to “Initial setting” by pressing [d] or [B], then press

Select.

3Scroll to “Set tel line” by pressing [d] or [B], then press Select.

Set tel line

KBack dB SelectL

4Scroll to “Set flash time” by pressing [d] or [B], then press Select.

Set flash time

KBack dB SelectL

5Select the desired time by pressing [d] or [B].

Set flash time :700ms

KBack dB SaveL

6Press Save, then press [OFF].

Incoming Call Tone Handset

During an intercom call (p. 36), you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times.

If this feature is turned off, no tones will be heard. The factory preset is “2”.

1Press [MENU].

2Scroll to “Ringer setting” by pressing [d] or [B], then press

Select.

3Scroll to “Incoming call.” by pressing [d] or [B], then press Select.

Incoming call.

KBack dB SelectL

4Select “On”, “Off” or “2” by pressing [d] or [B].

Incoming call tone :2

KBack dB SaveL

5Press Save, then press [OFF].

44