11
Installation
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Installing the Battery in the Cordless Handset
Insert the battery ( ), and press it down until it snaps into the compartment ( ).
Close the cover.
To replace the battery:
Press the notch on the cover rmly and slide it as
indicated by the arrow. Replace the old battery with a
new one (p. 12). Close the cover and charge the
cordless handset for about 15 hours.
Battery Charge

Place the cordless handset on the

charger and charge for about 15 hours

before initial use.

The unit beeps once, the CHARGE indicator
lights and Charging is displayed.

Battery strength

You can check the battery strength on the cordless handset display.
The battery strength is as shown in the chart below.
Display prompt Battery strength
Fully charged
Medium
Low
(ashing) Needs to be recharged.
Discharged
1 2