20
Preparing the Answering System

Greeting Message

You can record a personal greeting message of up to 2 minutes. If you do not
record your own message, one of two pre-recorded greetings will be played for
callers (p. 21).

To record a greeting message

To adjust the speaker volume, press
[] or [].
9 levels (08) are available while using the Answering System.
The number of steps shown on the display indicates the volume level.
The total recording time of all messages (greeting, incoming and memo) is
about 15 minutes. We recommend you record a brief greeting message in
order to leave more time for recording new messages.
Greeting message samples
Hello, this is (your name and/or number). Sorry I cannot take your call. Please
leave a message after the beep. Thank you.
To instruct callers to leave a message in a specific mailbox (Mailbox 1,
Mailbox 2 or Mailbox 3) (for mailboxes see page 51):
Hello, this is (your name and/or number). Sorry we cannot take your call. If
you have a message, for John press [#] and [1], for Jane press [#] and [2], for
Jack press [#] and [3]. Or just stay on the line and leave a message after the
beep. Thank you.
1Press and hold [GREETING] until
Record greeting after the beep is
heard.
2After the long beep, talk clearly,
about 20 cm (8 inches) away from
the MIC (microphone).
The elapsed recording time is
displayed.
If you record for over 2 minutes, the
unit will stop recording.
3When nished, press
[GREETING] or [STOP].
The unit will play back the recorded
greeting.
To change the greeting, start again
from step 1.
Base Unit