66
Canceling Registration/Re-registrationCanceling the Handset Registration
If you no longer need to use the cordless handset or if you want to use the cordless
handset with a different base unit of the same model, it is necessary to cancel the
registration from the current base unit.
Only one cordless handset can be canceled at a time near the base unit.
Make sure the cordless handset and the base unit are not being used.
•“[-]” is shown on the top right of the display.
•After canceling registration, the cordless handset will not work. To use it again,
registration will be required (p. 23, 67).
1Press [CONF/FUNCTION].
2Scroll to “Initial setting” by pressing
[] or [], then press
[]
.
3Scroll to “Registration” by pressing []
or [], then press
[]
.
4Scroll to “Deregistration” by pressing
[] or [], then press
[]
.
5Press [3][3][5] to delete the registration
memory.
•If you make a mistake, press [HOLD/CLEAR],
then enter “335”.
6Press the soft key ( ).
•The registration memory will be erased on both
the cordless handset and the base unit.
•If 3 beeps sound, you entered a wrong code.
Enter “335”, then press the soft key ( ).
•To register the cordless handset to another base
unit of the same model, start from step 5 on
page 67 or see page 23.
Handset
▼
Initial setting
▼
Registration
▼
Deregistration
Deregistration
Enter code:335
:335
OK
OK
Handset [2]
Deregistered[-]
Ex. Extension number 2