Troubleshooting
74
GeneralProblem Cause & Remedy
The unit does not work. •Check the settings (p. 10–12).
•Check whether the dialing mode setting is
correct (p. 17).
•Charge the battery fully (p. 11).
•Clean the charge contacts and charge again
(p. 12).
•Install the battery properly (p. 11).
•Unplug the base unit’s AC adaptor to reset it.
Plug in, and try again.
•The cordless handset has not been
registered to the base unit. Register the
cordless handset (p. 23, 67).
•Re-install the battery (p. 11) and charge it
fully.
“Recharge battery” is
displayed, “” flashes
or the cordless handset beeps
intermittently.
•Charge the battery fully (p. 11).
“Charge for 15HRS” and
“” are displayed and the
cordless handset does not
work.
•The battery has been discharged. Charge the
battery fully (p. 12).
You charged the battery fully,
but “Recharge battery” is
still displayed and/or “”
continues to flash, or “Charge
for 15HRS” and “” are
displayed.
•Clean the charge contacts and charge again
(p. 12)
.
•Install a new battery (p. 11, 12).
The CHARGE indicator does
not go out after the battery
has been charged.
•This is normal.
If you cannot solve your
problem
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY