Programming
27
KX-TG3031/KX-TG3032/KX-TG3033 only
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialling or
pressing any keys, including confirmation tones and error tones.
*4 The recall time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary.
The setting should stay at 600 ms unless pressing {RECALL} fails to pick up the
Call Waiting call.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*6 This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
Set line mode*5 {0}{5}{3}{1}:A{2}: <B>r–
Store VM
access#
{0}{7}{1}–r35
Time
adjustment*6
(Caller ID
subscribers only)
{4}{2}{1}:
<
Caller ID[auto]
>
{0}:Manual
r–
V.M. access {3}––36
Voice enhancer {5}{1}:On {0}: <Off>–18
Feature Feature
code
Setting code System
setting*1
Page
Message play {2}––31
Recording time {0}{6}{2}{1}:1min {2}:2min
{3}: <3min>
r34
Remote code {0}{6}{3}Default: 11 r33
Ring count {0}{6}{1}{2}–{7}:2–7 rings <4>
{0}:Toll saver
r33
Ringer tone
(Base unit)
{0}{*}{1}{1}–{3}:Tone <1>–3r–
Feature Feature
code
Setting code System
setting*1
Page