Transferring calls between handsets, conference calls
Outside calls can be transferred between 2 handsets. 2 handsets can have a conference call with an outside party.
1During an outside call, press
{INTERCOM} to put the call on hold.
2{V}/{^}: Select the desired unit. i {Transfer}
3Wait for the paged party to answer. LIf the paged party does not answer, press {C} to return to the outside
call.
4To complete the transfer: Press {OFF}.
LThe outside call is being routed to the handset.
To establish a conference call: Press {Conf}.
LTo leave the conference, press {OFF}. The other parties can
continue the conversation.
LTo put the outside call on hold, press {HOLD}. To resume the conference, press {Conf}.
Answering transferred calls Press {C} to answer the page.
LAfter the paging party disconnects,
you can talk to the outside caller.
Registering a handset
The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.
1Handset:
{MENU} i{0}{0}{1}
2Base unit:
Press and hold {LOCATOR} until the IN USE indicator flashes.
KX-TG3031/KX-TG3032/
KX-TG3033
Press and hold {LOCATOR/ INTERCOM} until the IN USE
indicator flashes.
LAfter the IN USE indicator starts flashing, the rest of the procedure must be completed within 1 minute.
3Handset:
Press {OK}, then wait until a beep sounds.
4{OFF}
Registering an additional handset
See page 5 for information on the available model.
Start from step 2.
Deregistering a handset
1{MENU} i{0}{0}{2}
2 {3}{3}{5} i{OK}
3Select the handset you want to
cancel by pressing the desired handset number ({1} – {4}).
Note:
LIf you do not use the handset, we recommend removing the battery to prevent malfunctioning.
38
