Camera Browser Interface | Camera en 41 |
|
|
9Camera
Camera
>Installer Menu
>Picture Settings
>ALC
>Enhance
>Encoder Profile
>Encoder Streams
>Privacy Masks
>Audio
9.1Installer Menu
9.1.1Base frame rate
Select 25 ips or 30 ips as the base frame rate for the camera.
Note:
Shutter times and frame rates are affected by this value.
9.1.2Mirror image
Select On to output a mirror image of the camera picture.
9.1.3Flip image
Select On to output an upside down camera image.
9.1.4Menu button
Select Disabled to prevent access to the install wizard via the menu button on the camera itself.
9.1.5Heater (dome cameras only)
Select Auto to let the camera determine when the heater should be switched on.
9.1.6Restore all defaults
Click Restore all defaults to restore the factory defaults for the camera. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset.
Bosch Security Systems | Software manual |
