Camera Browser Interface | Setting up VCA en 75 |
|
|
13.2VCA - Profiles
Two profiles can be set up with different VCA configurations. You can save profiles on your computer's hard drive and load saved profiles from there. This can be useful if testing a number of different configurations. Save a functioning configuration and test new settings. Use the saved configuration to restore the original settings at any time.
1.In the VCA configuration
2.If necessary, click Default to return all settings to default values.
3.Click the Save... to save the profile settings to another file. A new window opens where you specify the file name and the location.
4.Click Load... to load a saved profile. A new window opens where you select the location and the profile file.
To rename a profile:
1.To rename the file, click the icon to the right of the list field and enter the new profile name in the field.
2.Click the icon again. The new profile name is saved.
The current alarm status is displayed for information purposes.
13.2.1Aggregation time [s]
Set an aggregation time of between 0 and 20 seconds. The aggregation time always starts when an alarm event occurs. It extends the alarm event by the value set. This prevents alarm events that occur in quick succession from triggering several alarms and successive events in a rapid sequence. No further alarm is triggered during the aggregation time.
The
Bosch Security Systems | Software manual |
