Bosch Appliances FW5 software manual Alarm Connections

66 en Alarm Camera Browser Interface

12 Alarm

Alarm

>Alarm Connections

>VCA

>Audio Alarm

>Alarm E-Mail

>Alarm Task Editor

12.1Alarm Connections

In the event of an alarm, the camera can automatically connect to a pre-defined IP address. The camera can contact up to ten IP addresses in the order listed until a connection is established.

12.1.1Connect on alarm

Select On so that the camera automatically connects to a pre- defined IP address in the event of an alarm. Select Follows input 1 so that the device maintains the connection for as long as an alarm exists.

12.1.2Number of destination IP address

Specify the numbers of the IP addresses to be contacted in the event of an alarm. The device contacts the remote locations one after the other in the numbered sequence until a connection is made.

12.1.3Destination IP address

For each number, enter the corresponding IP address for the desired remote station.

12.1.4Destination password

If the remote station is password protected, enter the password here.

Only ten passwords can be defined here. Define a general password if more than ten connections are required, for

AM18-Q0605 v5.0 2011.07 Software manual Bosch Security Systems