38 en | Web Interface Camera Browser Interface
AM18-Q0605 | v5.0 | 2011.07 Software manual Bosch Security Systems
8.2 LIVEPAGE Functions
You can adapt the Livepage functions to meet your
requirements. Choose from a variety of different options for
displaying information and controls.
1. Mark the check boxes for the functions to be displayed on
the Livepage. The selected elements are checked.
2. Look at the Livepage to see if the desired items are shown.
8.2.1 Transmit audio
When selected, the audio from the camera (if on) is sent to the
computer. This setting applies only to the computer on which it
is made.
8.2.2 Show alarm inputs
The alarm inputs are displayed next to the video image as icons
along with their assigned names. If an alarm is active, the
corresponding icon changes color.
8.2.3 Show relay outputs
The relay output is shown next to the video image as an icon
along with its assigned name. If a relay is switched, the icon
changes color.
8.2.4 Show VCA trajectories
The trajectories (motion lines of objects) from the video
content analysis are displayed in the live video image if a
corresponding analysis type is activated.
8.2.5 Show VCA metadata
When video content analysis (VCA) is activated, additional
information is displayed in the live video stream. In Motion+
mode, the sensor areas for motion detection are marked.
8.2.6 Show event log
The event messages are displayed with the date and time in a
field next to the video image.