Panasonic KX-TG4382NZ, KX-TG4392NZ, KX-TG4381NZ, KX-TG4391NZ Caller’s recording time, Message alert

Answering System

your service provider/telephone company.

Note:

L This service can capture messages while the user is on a dial-up Internet connection.

Caller’s recording time

You can change the maximum message recording time allotted to each caller. You can also select “Greeting only” which sets the unit to greet callers but not record messages. The default setting is “3min”.

1{MENU} i{#}{3}{0}{5}

2{V}/{^}: Select the desired setting. i{Save} i{OFF}

Note:

L If you want to select “Greeting only”, follow the steps above and press {0} in step 2.

You may create your own greeting- only message by following the steps on page 32.

The unit plays the pre-recorded greeting-only message asking callers to call again if your own greeting-only message is not recorded.

Message alert

You can select whether or not the message indicator on the handset flashes slowly when new messages are recorded. The default setting is “On”.

Important:

L The message indicator will also flash slowly if there are new-recorded voice mail messages (page 37).

1{MENU} i{#}{3}{4}{0}

2{V}/{^}: Select the desired setting. i{Save} i{OFF}

Note:

L While message alert is on, battery operating time is shortened (page 14).

36