| Useful Information |
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
The handset beeps and/or | L Battery charge is low. Fully charge the |
7 flashes. | batteries (page 14). |
I fully charged the batteries, but | L Clean the charge contacts and charge again |
7 still flashes or 8 is | (page 14). |
displayed. | L It is time to replace the batteries (page 13). |
I fully charged the batteries, but | L Clean the battery ends (S, T) and the |
the operating time seems to be | charge contacts with a dry cloth, and charge |
shorter. | again. |
|
|
Making/answering calls, intercom | |
|
|
Problem | Cause/solution |
Noise is heard, sound cuts in | L You are using the handset or base unit in an |
and out. | area with high electrical interference. Place |
| the base unit and use the handset away from |
| sources of interference. |
| L Move closer to the base unit. |
| L Your unit is connected to a telephone line with |
| DSL/ADSL (JetStream) service. We |
| recommend that you contact your DSL/ADSL |
| service provider to have an DSL/ADSL Splitter |
| installed. We do not recommend the use of |
| generic DSL/ADSL filters. Contact your |
| DSL/ADSL provider for details. |
The handset does not ring. | L The ringer volume is turned off. Adjust the |
| ringer volume (page 24). |
| L Night mode is turned on. Turn it off (page 26). |
The base unit does not ring.*1 | L The ringer volume is turned off. Adjust the |
| ringer volume (page 18). |
I cannot make a call. | L The handset is too far from the base unit. |
| Move closer and try again. |
| L Dial lock is turned on. To turn it off, see page |
| 19. |
| L If the above remedy does not solve the |
| problem, set the dialling mode. Press |
| {MENU} {#} {1} {2} {0} {Save} {OFF}. |
| L The unit is not designed to be used with |
| rotary/pulse dialling services. |
*1 |
|
45
