Programmable Settings
20

Base unit ringer volume

Make sure the base unit is not being used.
To set the ringer volume to high (preset), medium, or low,
press
[
d
]
or
[
B
]
.
•To increase volume, press [B]. To decrease volume, press [d]
.
•To stop ringing, press [STOP].
To turn the ringer off, press and hold [d] until 2 beeps sound.
•“ ” is displayed.
To turn the ringer on, press [d]or [B].
•The base unit will ring at the low level.
•You can adjust the ringer volume while an outside call is ringing.
Press[d]or [B]while the base unit is ringin g.
To turn the ringer off, press and hold [d] until 2 beeps sound. “ ” is displayed.

Ringer Tone

You can set the handset and base unit ringers to use one of 7 ringer patterns for
outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4”
are preset melody patterns. The factory preset is “Tone 1”.
•You cannot change the ringer tone for intercom calls.
•
If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 3).
If you select a melody pattern, you will not be able to distinguish lines by their ringers.
•If you select one of the melody ringer patterns, the ringer will continue to sound for
several seconds if:
—the caller hangs up before you answer the call, or
—
another person answers the call using another phone connected on the same line.

Handset ringer tone

1Press [MENU].
2Press the soft key ( ) at “Ringer
setting”.
3Scroll to “Ringer tone” by pressing [d]or
[B], then press the soft key ( ).
4Select the desired ringer tone by pressing
[d]or [B].
•The handset will ring and the ringer tone will
change. If the ringer volume has been turned off,
the handset will not ring (p. 19).
•You can also select the ringer tone by pressing
[1] to [7].
5Press the soft key ( ), then press [OFF].
Base Unit
RINGER
OFF
RINGER
OFF
Handset
SELECT
Ringer setting
SELECT
Ringer tone
Ringer tone
1:Tone 1
SAVE