14
Programmable Settings

Programming Guidelines

The unit has several programmable functions which can be selected from the
function menu on the display (p. 15).

How to select a function item from the menu

•To go back to the previous menu, press the soft key ( ), or press the soft key
( ) while “---(Go back)----” is displayed. If you press this key in the
main menu, the unit will exit programming mode.
•After programming is complete, the display will return to the main menu or the
sub-menu depending on which menu the selected item is located. (See the menu
table on page15.)
•You can exit programming mode at any time by pressing [OFF].
•
If you do not press any buttons for 60 seconds, the unit will exit programming mode.
•If the unit detects a problem, an error message will be displayed (p. 75) and/or
error beeps will sound.
Make sure the handset and base unit are not being used. The handset
must be operated near the base unit and while off the base unit.

1

Press
[MENU]
.
•The main menu is displayed (p. 15).
2Scroll to the desired item by pressing [d]or [B].
3Press the soft key ( ) to select the desired item.
4If the item has a sub-menu, select the menu item (p. 15).
Repeat steps 2 and 3 until the desired item is displayed.
If the item has no sub-menu, go to step 5.
5Select the desired setting by pressing [d]or
[B], then press the soft key ( ).
•A confirmation tone will be heard and the setting
will be saved.
6Press[OFF] to exit programming mode.
Handset
SAVE
SAVE
BACK
BACK
SAVE
[OFF] exits
programming.
Navigator key scrolls
through the menu. [MENU] enters the
function menu.
The soft key works as
the or key.
The soft key works
as the key.
BACK
SAVE
SELECT
B
Ringer setting
d
BACK
PLAY
SELECT
SELECT
SAVE
d
B
BACK
PLAY SAVE
BACK
SELECT