Special Features
52

FLASH Button

Pressing[FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
•Pressing [FLASH/CALL WAIT]cancels the mute or the Temporary Tone Dialing
mode (p. 50, 51).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)”. The factory preset is “700 ms”.
•The setting should stay at 700 ms unless pressing [FLASH/CALL WAIT] fails to
pick up the Call Waiting call.
•If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1Press [MENU].
2Scroll to “Initial setting” by pressing
[d]or [B], then press the soft key ( ).
3Scroll to “Set tel line” by pressing [d]or
[B], then press the soft key ( ).
4Scroll to “Set flash time” by pressing [d]
or [B], then press the soft key ( ).
5Select the flash time by pressing [d]or [B].
6Press the soft key ( ), then press [OFF].
Handset Base Unit
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set flash time
Set flash time
:700ms
SAVE