44
Speed Dialer

Storing Phone Numbers

You can store up to 10 phone numbers in the base unit. The dialing buttons ([0] to
[9]) function as memory stations.
Make sure the base unit is not being used.
•If a pause is required when dialing, press [REDIAL/PAUSE] where needed.
“” is
displayed when
[REDIAL/PAUSE] is pressed. A pause counts as one digit (p.50).
•When [*] is pressed, “ ” is displayed. When [#] is pressed, “ ” is displayed.
•If a phone number is stored in a memory location which already contains a phone
number, the old number will be erased.
•We recommend you make a note of which phone numbers are stored in which
memory locations.

To erase a stored number

1. Press [PROGRAM], then press [AUTO].
2. Press the memory station number (
[0]
to
[9]
) for the phone number to be erased.
•A long beep sounds and the phone number is erased.

Dialing a Stored Phone Number

•Speed dial numbers stored in the base unit can only be dialed from the base unit.
1Press [PROGRAM].
•The IN USE indicator flashes and
“”
is displayed.
2Enter a phone number of up to 32
digits.
•The last digit of the entered number is
displayed.
•If you misdial, press [PROGRAM],
and start again from step 1.
3Press [AUTO].
4Press a memory station number
([0] to [9]).
•A long beep sounds and the phone
number is saved.
•To store other numbers, repeat from
step 1.
1Press [SP-PHONE].
2Press [AUTO].
3Press a memory station number ([0] to [9]).
•The stored number is dialed.
Base Unit
[SP-PHONE]
[PROGRAM]
[AUTO]
Memory
Station
Numbers
[REDIAL/PAUSE]
Base Unit