Programming
Special instructions for programmable settings
Alarm
You can set one of 2 different alarm options (once or daily) at a time for each handset. An alarm sounds at the set time for 3 minutes.
Important:
L Set the date and time beforehand (page 16).
1K (middle soft key)
2{V}/{^}: “Handset Setup” i
M
3{V}/{^}: “Time Settings” i
M
4{V}/{^}: “Alarm” i M
5{V}/{^}: Select the desired alarm option. i M
“Off”
Turns alarm off. Press M again, then press {ih} to exit.
“Once”
An alarm sounds once at the set time. Enter the desired date and month.
“Daily”
An alarm sounds daily at the set time.
6Set the desired time. i M
7{V}/{^}: Select the desired ringer tone. i M 2 times
L We recommend selecting a different ringer tone to the one used for outside calls.
L When the alarm is set, E is displayed.
8{ih}
Note:
L You can skip to step 4 by pressing {R/E} in standby mode.
L To stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
LIf you select “Once”, the setting changes to “Off” after the alarm sounds.
LEven when the ringer volume for outside calls is set to off (page 23), the alarm sound is heard at a low level.
Time adjustment (Caller ID subscribers only)
This feature allows the unit to automatically adjust the date and time each time caller information is received. To use this feature, your caller ID service has to provide caller information, including date and time. Contact your service provider/telephone company for details.
To turn this feature on, select “Caller ID[Auto]”. To turn this feature off, select “Manual”.
Important:
L To use this feature, set the date and time first (page 16).
1K (middle soft key)
2{V}/{^}: “Handset Setup” i
M
3{V}/{^}: “Time Settings” i
M
4{V}/{^}: “Time Adjustment” i
M
5{V}/{^}: Select “Caller ID[Auto]” or “Manual”. i M i {ih}
25
