Panasonic KX-TG8021BX, KX-TG8011BX Increasing the range of the base unit, Cancelling a base unit

TG8011_8021BX(e).book Page 30 Monday, September 29, 2008 1:07 PM

Programming

5{V}/{^}: “Yes” i M

L A confirmation tone sounds as each handset number disappears.

L The handset does not beep when cancelling its own registration.

6{ih}

Cancelling a base unit

A handset can cancel a base unit that it is registered to. This allows the base unit to end its wireless connection with the system.

1K(middle soft key) i Ni

M

2{V}/{^}: “Registration” i

M

3{3}{3}{5}

4{V}/{^}: “Cancel Base” i M

5Select the base unit(s) you want to cancel by pressing the desired base unit number. i M

L The selected base unit number(s) flashes.

L To cancel a selected base unit number, press the number again. The number stops flashing.

6{V}/{^}: “Yes” iMi {ih}

Note:

L To register a handset to another base unit or to the same base unit again, see page 29.

Increasing the range of the base unit

You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 5. Contact your Panasonic dealer for details.

Important:

L Before registering the repeater to this base unit, you must turn the repeater mode on.

L Do not use more than one repeater at a time.

Setting the repeater mode

1K(middle soft key) i <i

M

2{V}/{^}: “Repeater Mode” i

M

3{V}/{^}: Select the desired setting. i Mi {ih}

Note:

L After turning the repeater mode on or off, w flashes on the handset momentarily. This is normal and the handset can be used once w stops flashing.

30