Panasonic KX-TG8011BX, KX-TG8021BX, KX-TG8012BX operating instructions Unit does not record new

TG8011_8021BX(e).book Page 49 Monday, September 29, 2008 1:07 PM

		Useful Information
Answering system (KX-TG8021)
Problem		Cause/solution
The unit does not record new		L The answering system is turned off. Turn it on
messages.		(page 33).
		L The message memory is full. Erase
		unnecessary messages (page 35).
		L The recording time is set to “Greeting
		Only”. Change the setting (page 38).
		L If you subscribe to the voice mail service,
		messages are recorded by your service
		provider/telephone company not your
		telephone. Change the unit’s number of rings
		setting or contact your service provider/
		telephone company (page 37).
My own greeting message		L Record your own greeting message again
cannot be properly heard.		(page 34).
I cannot operate the answering	L Someone is using the unit. Wait for the other
system.		user to finish.
		L A caller is leaving a message. Wait for the
		caller to finish.
		L The handset is too far from the base unit.
		Move closer.
I cannot operate the answering	L You are entering the wrong remote access
system remotely.		code. If you have forgotten your remote
		access code, enter the remote access code
		setting to check your current code (page 36).
		L Press each key firmly.
		L The answering system is turned off. Turn it on
		(page 37).
		L You are using a rotary/pulse telephone. Try
		again using a touch-tone phone.
While recording a greeting		L A call is being received. Answer the call and
message or listening to		try again later.
messages, the unit rings and
recording stops.

49