TG8511_19BX(e).book Page 13 Thursday, July 8, 2010 5:44 PM
Getting Started
Dialling mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service.
11(centre of navigator key) i
{#}{1}{2}{0}
2{V}/{^}: Select the desired setting. i Mi {ic}
Date and time
11(centre of navigator key) i
{#}{1}{0}{1}
2Enter the current date, month, and year. i M
Example: 15 July, 2010
{1}{5} {0}{7} {1}{0}
3Enter the current hour and minute. Example: 15:30
{1}{5} {3}{0}
4Mi {ic}
Note:
L When you select Arabic or Persian as the display language, enter the current year, month, and date.
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
L The date and time may be incorrect after a power failure. In this case, set the date and time again.
One touch eco mode
The {ECO/R} button on the handset enables you to activate the eco function with one touch.
By activating eco mode, your unit can reduce the base unit transmission power by up to 90% in standby mode.
You can turn on/off one touch eco mode by just pressing {ECO/R}. The default setting is “Normal”.
–When the one touch eco mode is on: “Low” is temporarily displayed and i is shown on the handset display instead of w.
–When the one touch eco mode is off: “Normal” is temporarily displayed and igoes off from the handset display.
Note:
LWhen there is another cordless phone nearby and it is in use, the base unit transmission power may not be reduced.
L Activating one touch eco mode reduces the range of the base unit in standby mode.
L If you set the repeater mode to “On” (page 30):
–One touch eco mode is cancelled.
–“Eco Setup” is not shown in the display menu (page 22).
13
