TG8511_19BX(e).book Page 45 Thursday, July 8, 2010 5:44 PM
| Useful Information |
|
|
Problem | Cause/solution |
I cannot send or | L You have not subscribed to the appropriate service. |
receive SMS | Contact your service provider/telephone company. |
messages. | L The SMS message centre number(s) are not stored or |
| are incorrect. Store the correct numbers (page 33). |
| L Message transmission was interrupted. Wait until the |
| message has been sent before using other telephone |
| functions. |
| L If you use a DSL/ADSL service, we recommend |
| connecting a DSL/ADSL filter between the base unit |
| and the telephone line jack. Contact your DSL/ADSL |
| provider for details. |
“FD” is displayed. | L The unit could not connect to the SMS message |
| centre. Confirm that the correct SMS message centre |
| numbers are stored. Confirm that SMS is turned on |
| (page 33). |
“FE” is displayed. | L An error occurred while sending the message. Try |
| again. |
“E0” is displayed. | L Your phone number is permanently withheld or you |
| have not subscribed to the appropriate service. |
| Contact your service provider/telephone company. |
|
|
Liquid damage |
|
|
|
Problem | Cause/solution |
Liquid or other form of | L Disconnect the AC adaptor and telephone line cord |
moisture has entered | from the base unit. Remove the batteries from the |
the handset/base unit. | handset and leave to dry for at least 3 days. After the |
| handset/base unit are completely dry, reconnect the |
| AC adaptor and telephone line cord. Insert the |
| batteries and charge fully before use. If the unit does |
| not work properly, contact an authorised service |
| centre. |
Caution:
LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
45
