Panasonic KX-TG8511BX operating instructions Programming using the direct commands

TG8511_19BX(e).book Page 23 Thursday, July 8, 2010 5:44 PM

Programming

Programming using the direct commands

11(centre of navigator key) i {#}

2Enter the desired code.

3Select the desired setting. i M

L This step may vary depending on the feature being programmed. L To exit the operation, press {ic}.

Note:

L In the following table, < > indicates the default settings.

Feature	Code	Setting		Page
Caller List	{2}{1}{3}		–	32
Set Date/Time	{1}{0}{1}		–	13
Memo Alarm	{7}{2}{0}	{1}: Alarm1		26
		{2}: Alarm2
		{3}: Alarm3
Time Adjustment*1	{2}{2}{6}	{1}: Caller ID		–
		{0}: <Manual>
Intercom*2	{2}{7}{4}		–	–
Ringer Volume*3	{1}{6}{0}	{1}–{6}: Level 1–6 <6>		–
(Handset)		{0}: Off
Ringtone*4, *5	{1}{6}{1}	<Ringtone 1>		–
(Handset)
Night Mode	{2}{3}{8}	{1}: On {0}: <Off>		26
(On/Off)
Night Mode	{2}{3}{7}	<23:00/06:00>		27
(Start/End)
Night Mode	{2}{3}{9}	{1}: 30 sec.		27
(Ring Delay)		{2}: <60 sec.>
		{3}: 90 sec.
		{4}: 120 sec.
		{0}: No Ringing
Night Mode	{2}{4}{1}	{1}–{9}:Category 1–9		27
(Select Category)
Handset Name	{1}{0}{4}		–	27
Caller Barred	{2}{1}{7}		–	28
Transmission Power	{7}{2}{5}	{1}: <Normal> {2}: Low		13
Wallpaper*6	{1}{8}{1}	<Wallpaper1>		–
Display Colour	{1}{8}{2}	{1}–{5}: Colour1–5		–
		<Colour1>
Display Mode	{1}{9}{2}	{1}: <Multi Items>		14
		{0}: Single Item
				23