TG8511_19BX(e).book Page 27 Thursday, July 8, 2010 5:44 PM
Programming
4Enter the desired hour and minute you wish to end this feature. i
M
5{ic}
L When the night mode is set, 3is displayed.
Note:
LTo correct a digit, press {<} or {>} to move the cursor to the digit, then make the correction.
Changing the start and end time
11(centre of navigator key) i
{#}{2}{3}{7}
2Continue from step 3, “Turning night mode on/off”, page 26.
Setting the ring delay
This setting allows the handset to ring during night mode if the caller waits long enough. After the selected amount of time passes, the handset rings. If you select “No Ringing”, the handset never rings during night mode.
11(centre of navigator key) i
{#}{2}{3}{9}
2{V}/{^}: Select the desired setting. i Mi {ic}
Selecting categories to bypass night mode
11(centre of navigator key) i
{#}{2}{4}{1}
2{V}/{^}: Select your desired categories. i t
L “Q” is displayed next to the selected category numbers.
L To cancel a selected category, press tagain. “Q” disappears.
3Mi {ic}
Note:
L You can also select the categories in step 2 as follows:
Press {1} to {9}. i M
Changing the handset name
Each handset can be given a customised name (“Bob”, “Kitchen”, etc.). You can also select whether or not the handset name is displayed in standby mode. The default setting is “Off”. If you select “On” without entering any handset name, “Handset 1” to “Handset 6” is displayed.
11(centre of navigator key) i
{#}{1}{0}{4}
2Enter the desired name (max. 10 characters; page 37).
L If not required, go to step 3.
3M
4{V}/{^}: Select the desired setting. i M2 times
5{ic}
Storing an area code to be deleted automatically
In some situations, phone numbers stored automatically in the caller list (page 32) will include area codes. If you do not want to dial the area code when making calls from the caller list, you can store the area code which you want the unit to delete automatically.
Example: You have stored the area code “123”. If you make a call from the caller list to the phone number
11(centre of navigator key) i
{#}{2}{5}{5}
2Enter an area code (5 digits max.). i Mi {ic}
27
