TG8511_19BX(e).book Page 33 Thursday, July 8, 2010 5:44 PM
SMS (Short Message Service)
Using SMS
SMS allows you to send and receive text messages between other
Important:
L To use SMS features, you must:
–subscribe to a Caller ID and/or an appropriate service such as SMS.
–confirm that SMS is turned on.
–confirm that the correct message centre numbers are stored.
Contact your service provider/ telephone company for details and availability.
Note:
L A total of 47 messages (at 160 characters/message) can be saved. Total number may be more than 47 if length of messages is less than 160 characters/message.
L If the unit is connected to a PBX system, you may not be able to use SMS features.
Turning SMS on/off
The default setting is “Off”.
11(centre of navigator key) i
{#}{3}{5}{7}
2{V}/{^}: Select the desired setting. i Mi {ic}
Storing SMS message centre numbers
SMS message centre numbers must be stored in order to send and receive SMS messages.
Contact your service provider/telephone company for more information.
1To store “Message Centre1”:
1(centre of navigator key) i
{#}{3}{5}{1}
To store “Message Centre2”:
1(centre of navigator key) i
{#}{3}{5}{2}
2Edit the number as necessary. i Mi {ic}
Note:
L For PBX users:
–You need to add the PBX line access number and a dialling pause to the beginning of the Message Centre 1 number.
–If you only use the Message Centre 1 number for SMS, store the Message Centre 1 number as is (without adding a line access number or dialling pause) to Message Centre 2.
Sending a message
Writing and sending a new message
11(centre of navigator key) i Xi M
2{V}/{^}: “Create” i M
L If “^Use Last Text?” is displayed, you can use the text
33
