TG8511_19BX(e).book Page 25 Thursday, July 8, 2010 5:44 PM
Programming
*1 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*2 For models with 2 or more handsets included.
*3 When the ringer volume is turned off, ~is displayed and the handset does not ring for outside calls.
However even when the ringer volume is set to off, the handset still rings for memo alarm (page 26) and paging (page 16).
*4 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*6 You can set the wallpaper to display with or without date and time. The default setting is with date and time displayed.
*7 You can set the handset display backlight while on charge.
–“On”: Backlight is on (dimmed).
–“Off”: Backlight turns off after 10 seconds of charging.
*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*10The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*11To prevent other users from joining your conversations with outside callers, turn this feature on.
25
