NEC 2400IMX system manual PBX and ACD Command Programming

CHAPTER 7 PBX AND ACD COMMAND PROGRAMMING

1.GENERAL

This chapter explains the commands which are used exclusively for the NEAX2400 CallCenterWorX-Enter- prise ACD system. For other related commands, refer to the NEAX2400 IMX Office Data Specification. When engaging in command operations concerning the ACD system, ensure to use both this manual and NEAX2400 IMX Office Data Specification.

2.COMMANDS

2.1NEAX2400 IMX COMMANDS

For ACD commands, see Section 2.2,“ACD Commands” in this chapter.

Table 7-1 NEAX2400 IMX Command List in Alphabetical Order

COMMAND	FULL NAME
NAME
AADT	Assignment of Announcement/Dictation Trunks
AADTN	Assignment of Announcement/Dictation Trunks for NDM
ACNO	Assignment of Conversion Number Data
ACNOL	Assignment of Conversion Number Data for LDM
ACNON	Assignment of Conversion Number Data for NDM
AKYD	Assignment of Key Data for Dterm
ALGNN	Assignment of Telephone Number Data for NDM
ALGSN	Assignment of Telephone Station Data for NDM
AMNO	Assignment of Monitored Number
AMNOL	Assignment of Monitored Number for LDM
AMNON	Assignment of Monitored Number for NDM
AOKC	Assignment of OAI Key Code
ASDT	Assignment of Station Data
ASFC	Assignment of Service Feature Restriction Class Data
ASYD	Assignment of System Data
ASYDL	Assignment of System Data into Local DM (LDM)
ASYDN	Assignment of System Data in NDM

Note: Assign “1” to parameter “OAI” of “MMNF” command prior to using OAI command.

NDA-24282CHAPTER 7

Page 333

Revision 1.0