NEC 2400IMX Asydn Assignment of System Data in NDM, Network Data Memory NDM usage. Assign data 1

ASYDN: ASSIGNMENT OF SYSTEM DATA IN NDM

ASYDN: Assignment of System Data in NDM

1.Function

This command is used to specify the system data for the Fusion Network.

2.Precautions

1.The data assigned by this command determines the service condition which affects the other nodes in the Fusion Network.

2.Data for ASYDN assigned at Network Control Node (NCN) has priority over data for ASYDL assigned at LN (Local Node) in the Fusion Network.

3.The ASYDN command consists of SYS1, INDEX 0 - 1535.

4.For more details, see the “Fusion System Manual”.

System Data (NDM) Programming Sheet

SYSTEM	SYSTEM	DATA	BIT
			CORRESPONDING
DATA	DATA	(DATA)	DATA
	INDEX				SYSTEM DATA CONTENTS
TYPE		00 – FF
	(INDEX)
			DATA
(SYS)		(Hex)		BIT
	0-1535
			0/1

		Network Data Memory (NDM) usage. Assign data “1 (the
		memory block is used)” for the corresponding memory block.
			bit	Memory Block
			b0	Memory Block 0
	514
1			b1	Memory Block 1
			b2	Memory Block 2
			b3	Memory Block 3
			b4	Memory Block 4

533

FPC number of the node that has the standard VNDM (1-253).

NDA-24282CHAPTER 7

Page 341

Revision 1.0