NEC 2400IMX system manual Pbih, Pbil

PH-BS16 (PBI)

5.Switch Settings

Standard settings of various switches on this circuit card are shown in the table below.

	SWITCH		STAN-
SWITCH NAME		SETTING	DARD	MEANING
	NO.
			SETTING

MB		UP		Circuit card make busy.
	ON
		DOWN	⋅	Circuit card make idle.
PBIH		7	⋅	Fixed
PBIL		0		Not used.
		~		~
		7		Not used
		8		ACDP0-System No. 0 (Mounted in Slot No. 13
				of APMA0) (standard setting)
		9		ACDP0- System No. 1(Mounted in Slot No. 14
				of APMA0) (standard setting)
		A		ACDP1-System No. 0 (Mounted in Slot No. 13
				of APMA1)
		B		ACDP1-System No. 1 (Mounted in Slot No. 14
				of APMA1)
		C		ACDP2-System No. 0 (Mounted in Slot No. 13
				of APMA2)
		D		ACDP2-System No. 1 (Mounted in Slot No. 14
				of APMA2)
		E		Not used
		F		Not used

NDA-24282CHAPTER 4

Page 93

Revision 1.0