NEC 2400IMX system manual CPU ACT/ST-BY Change Function, =Out of Service 1=In Service

ASYD: ASSIGNMENT OF SYSTEM DATA

			System Data-1 Programming Sheet
	SYSTEM			BIT
SYSTEM		DATA	CORRE-
	DATA		SPONDING
DATA		(DATA)				SYSTEM DATA CONTENTS
	INDEX			DATA
TYPE		00 ~ FF
	(INDEX)
(SYS)		(Hex)
			DATA
	0 ~ 511				BIT
			0/1
	89				b3	CPU ACT/ST-BY Change Function
						0=Out of Service; 1=In Service
					b0	ACDP (No. 0 System) Mounting Status Indication
	207					0/1 = Not Mounted/Mounted Note 1
					b1	ACDP (No. 1 System) Mounting Status Indication
						0/1 = Not Mounted/Mounted Note 2
			1		b2	Call Event Processing
1	241					0/1 = Invalid/Valid (Always assign 1)
			1		b3	Details of SCF Error Notification
						0/1 = Ineffective/Effective
	448		1		b1	Higher ACDP controlling capability
					b0	SCF Call origination from the first party notification
						0/1 = Ineffective/Effective
	449
						Access to Announcement trunk is controlled:
					b2	0 = by the timer
						1 = by the DAT Note 3
Note 1: This bit is always set to “1”.

Note 2: This bit is set to “1” for dual ACDP’s. If single ACDP, this bit is set to “0”. This bit is always set to “0” for internal ACDP.

Note 3: The announcement service for fusion network, “1 = DAT control” is not available.

NDA-24282CHAPTER 7

Page 337

Revision 1.0