NEC 2400IMX system manual SW10 For Port SW11 SW12 MIS Port Interface

PH-PC27 (EAPI)

SWITCH

NAME

SW10

(for Port 0)

SW11

(for Port 1)

SW12

(for Port 2)

MIS Port Interface

SWITCH NO.	SETTING	STANDARD				MEANING
		SETTING
1
	SW01-1	SW01-2		SW01-3		NON-PROTOCOL RS-232C
	SW11-1	SW11-2		SW11-3		PORT DATA SPEED SETTING
	ON	ON		ON		300 bps
2	ON	ON		OFF		600 bps
	ON	OFF		ON		1200 bps
	ON	OFF		OFF		2400 bps
	OFF	ON		ON		4800 bps
3	OFF	ON		OFF		9600 bps
	OFF	OFF		ON		19200 bps
			Sets the non-protocol RS-232C port stop bit
	ON	⋅	length to 1 bit.
4
			Sets the non-protocol RS-232C port stop bit
	OFF		length to 2 bit.
			Sets the non-protocol RS-232C port data length
	ON	⋅	to 7 bit.
5
			Sets the non-protocol RS-232C port data length
	OFF		to 8 bit.
6	SW01-6	SW01-7			NON-PROTOCOL RS-232C PORT
	SW11-6	SW11-7				PARITY BIT SETTING
	ON	ON		ODD Parity Check
	ON	OFF		EVEN Parity Check (standard setting)
7
	OFF	OFF		No Parity Check is to be made
			Sets the polarity of non-protocol RS-232C PB
	ON		signal to Not Provided.
8
			Sets the polarity of non-protocol RS-232C PB
	OFF	⋅	signal to +, or sets PB signal to Provided.

Note: Ports 0, 1 and 2 translate to MIS ports 1, 2 and 3.

NDA-24282CHAPTER 4

Page 57

Revision 1.0