NEC 2400IMX system manual Assist Destination

Models: 2400IMX

1 485
Download 485 pages 63.2 Kb
Page 310
Image 310

SPLITS - ACD

Assist Destination

A destination to receive calls when an agent presses the Assist Key can be specified for each split.

Auto Ready after PBX Call

A feature may be setup such that an agent’s position will be automatically replaced in the Ready Mode at the conclusion of a call on their PBX line.

Auto Work with PBX Answer

ACD positions may be automatically placed in the Work Mode when an agent answers an incoming call on their PBX line.

Auto Work with PBX Ringing

ACD positions may be automatically placed in the Work Mode when an incoming call begins to ring on their PBX line.

Auto Work with PBX Dialing

ACD positions may be automatically placed in the Work Mode when an agent receives dial tone in order to place an outgoing call on their PBX line.

Break Types

By simply pressing a digit ‘1’ through ‘9’ when entering the Break Mode the MIS systems can track more closely how an agent’s time is being spent.

Call Recover Timer

After a call has been assigned to an agent’s position it is expected to be answered within a certain short period of time. If the call is not answered it can be programmed to be recovered and placed back in queue. At this time it will be connected immediately to another agent if one is available or will wait as the highest priority call to be connected as soon as one is available.

Call Waiting Chime On

The Call Waiting feature includes an optional chime which sounds only at ACD positions which are in the Work Mode at the moment the CW light turns on or begins flashing.

Call Waiting Threshold

The Call Waiting LED can be programmed to light when ‘X’ calls are in queue and begin flashing when there are ‘Y’ calls in queue. The thresholds are programmed independently for each split.

Conditional Threshold

Certain splits may be programmed to only accept overflow calls from other splits only if certain thresholds have not been exceeded. Either too many calls in queue or not enough available agents can prevent conditionally queued incoming calls from reaching this split.

NDA-24282 (E)

CHAPTER 5

 

Page 291

 

Revision 1.0

Page 310
Image 310
NEC 2400IMX system manual Assist Destination