NEC 2400IMX system manual Aokc Assignment of OAI Key Code, Kind, Tone, Nnd, Op-Code

AOKC: ASSIGNMENT OF OAI KEY CODE

AOKC: Assignment of OAI Key Code

1.Function

This command is applied to define the usage of D term buttons (line/feature key and flex key).

2.Precautions

1.AOKC must be programmed before AKYD is programmed.

2.For station assignment, the OAI Key Codes correspond to the Function Key Code (FKY) range from 34 through 47 (refer to AKYD).

3.After the OAI key code data is changed or deleted by this command or the system initial is executed, newly programmed data is invalid for the first operation.

4.OAI key code data programmed in this command must be set to all nodes to be provided ACD service for Fusion network.

3.Parameters

KEY-CODE: OAI Key Code (1-31)

F-KIND:	Kind of Facility
	1=	(MSF) Terminal Mode Set Facility
	2=	(TMF) Terminal Multiple Information Transfer Facility
	3=	(OAC) OAI Access Code Request
	4=	(KTF) Key Code Transfer Facility
	5~15=	Not used
C-TONE:	Confirmation Tone
	0 = Confirmation Tone
	1 = No Tone
NND:	Number of Necessary Digits (available for F-KIND=3 only)
OP-CODE:	Operation Code
	128 thru 191 (for F-KIND = 1)
	192 thru 255 (for F-KIND = 2)

Note 1: The following operation codes are not available for OAI system when OAI system and ACD system are used in the same Fusion network.

When F-KIND=1 (MSF)	OP-CODE	185~191
When F-KIND=2 (TMF)	OP-CODE	248~255

CHAPTER 7 NDA-24282

Page 342

Revision 1.0