NEC 2400IMX system manual System Tenants 1 ~

SYSTEM INFORMATION

Orig Detail Codes:	Yes/No (Default = No)
Trim CP Trace Space:	Yes/No (Default = No)
Large CP Trace Buffer:	Yes/No (Default = Off)
Dash
Min Len:	1 to 16 (Default = 7)
Index 1 ~ 5:	0 to 11
Incoming Call Msg:	IQ or Iq
Outbound Call Disp:	IZ or Iz
Reclaim IVR Call to:	Music/Ring Back
Work Key Press:	Ready Mode/Disable Timer
MIS Split Capacity:	4/16 (Default = 4)
Use Infolink Split Information:	No/Yes

Tenant Settings

1.Function

This command maintains the ACD’s system data tenant table. If the system is required to accept calls from trunks/stations beyond the ACDTN range (1-10), this command allows the user to program these tenants. Note that if this table is used, all tenants from which ACD calls might originate (including tenants 1-10) must be programmed. As all ACD entities (splits, positions, etc.) must still reside in tenants 1-10, ACDTN must still be programmed to provide the necessary tenant information.

System Data

User Settings Tenant Settings Time Out Settings

	<	System Tenants 1 ~ 60								>
1		2	3	4	5	6	7	8	9		10
11		12	13	14	15	16	17	18	19		20
21		22	23	24	25	26	27	28	29		30
31		32	33	34	35	36	37	38	39		40
41		42	43	44	45	46	47	48	49		50
51		52	53	54	55	56	57	58	59		60

Update

List

Close

Update System Data?

2.Parameters

System Tenants: Highlight the number of the tenant to be updated, and select the Update option.

NDA-24282CHAPTER 7

Page 419

Revision 1.0