NEC 2400IMX MIS has locked up. To be displayed when Asyd command, SYS, Index 42, b2 =

SYSTEM MAINTENANCE

3. SYSTEM MESSAGES

3.1 SYSTEM MESSAGES AND THEIR MEANINGS

The system messages shown in Table 9-2is displayed when faults occur with the ACD within the IMX system. This table shows the system messages and their meaning.

		Table 9-2 System Messages for MIS
SYSTEM	MEANING		FAULT CONTENTS
MESSAGE
4-R	TCP/IP Link Failure		A fault has occurred to the UAP or to the line connected with the
			external computer.
			Abnormal occurrence, and the communication between ACDP and
5-Q	ACD-MIS LOCK UP		MIS has locked up. (To be displayed when ASYD command, SYS 1,
			INDEX 42, b2 = “1”.)
6-H	Bad Call Notification		This message is issued to indicate the result of Bad Call Notification.
26-V	LAN Interface Error		A fault, related to the TCP/IP connection between the PBX and MIS/
	Report		HOST, occurred.

NDA-24282 (E)	CHAPTER 9
	Page 437
	Revision 1.0