Xerox Printer manual XFP1003W Character not in FDL alphabet

MESSAGES

XFP1003W Character not in FDL alphabet

Indication A character was found in the FSL statements that does not exist in the FSL alphabet. The character was ignored.

Action Verify that the character does not belong in the FSL statements, then move or delete it.

XFP1004W DRAW N and REPEAT EVERY disagree, using 2

Indication The number of lines entered for the DRAW command must be greater than 1. The compiler substituted 2 for the invalid existing number.

Action Enter the correct values and recompile the form.

XFP1005W Undefined Section Name <name>, command ignorned

Indication The section name used has not been defined.

Action Verify that the section name was spelled correctly or make sure the section is defined prior to invoking it with the DO SECTION command.

XFP1006W Invalid line weight, using HAIRLINE

Indication An invalid line weight was entered. The compiler substituted a value of HAIRLINE.

Action If HAIRLINE is not the value you want, correct the FSL and recompile the form.

XFP1007W Invalid border weight, using HAIRLINE

Indication An invalid border weight was entered for a box. The compiler substituted a value of HAIRLINE.

Action If HAIRLINE is not the value you want, enter a valid border weight.

XFP1008W Possible missing or unmatched quotes

Indication The compiler cannot detect a closing quote.

Action Make sure that all quotes in the preceding commands in your FSL are matched.

XFP1009E 600 spi cannot be used with highlight color form

Indication There is no Xerox printer support for highlight color in 600 spi mode.

Action Use 300 spi for color forms or use black and white mode for 600 spi.

HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS 6±5