Xerox Printer AT 4,6 Draw 4 Boxes 14 Wide by 4 High Using Solid, Hairline INK 2 and Repeat Every

HOST FORMS DESCRIPTION LANGUAGE

Parameters	Cy specifies the y±axis coordinate for the box origin location.
	Cx specifies the x±axis coordinate for the box origin location.
	units indicates the unit of measure for specifying the box origin.
	The units are INCHES, CENTIMETERS, DOTS, and XDOTS. You
	can use two decimal places when you specify inches and
	centimeters. You must express DOTS and XDOTS in integers.
	The number of boxes you want to draw is n.
	IN units is a shorthand method of specifying units for the entire
	command. IN units overrides all other units used. For example,
	if you want to draw a box using inches but specify grid FMT1, IN
	INCHES uses inches as the grid for all units in the specific BOX
	statement.
	The width of the box you have specified is p.
	The height of the box you have specified is q.
	SOLID, BROKEN, or DOTTED specifies the type of line.
	HAIRLINE, 0 point (invisible), 1 point, or 2 points specifies the
	thickness of the line for your box.
	INK n specifies the INK number you selected from the ink list to
	draw the line in color for use on a Xerox highlight or full color
	LPS printer. You may specify the same, or different, ink numbers
	for the outline of the box.
	FILL and INK n specifies the ink you want to use to fill a box.
	The box fill can be a color or a tint of color. The ink you specify
	must be defined in the ink list of the INK command.
	SHADING specifies shadowing: LIGHT, MEDIUM, or HEAVY.
	REPEAT specifies that you want a box repeated according to the
	following commands.
	HORIZONTALLY or VERTICALLY specifies the orientation of the
	repeated boxes.
	EVERY Ci indicates that you want a box repeated at the
	increment (Ci) you have specified.
	AT Ca indicates the absolute x or y coordinate where you want
	the box repeated in a horizontal or vertical direction.
Defaults	SOLID, if you do not specify the line type.
	1, if you do not specify the line weight or shading.
	0, if you do not specify the line weight but do specify shading.
	MEDIUM, if you do not specify the degree of SHADING.
	HORIZONTALLY, if you do not specify the REPEAT orientation.
	When you specify a box and shade with one command and do
	not specify a line type for your box, your box will be shaded but
	you will not have a line around it.
Examples	Long form:
	AT 4,6 DRAW 4 BOXES 14 WIDE BY 4 HIGH USING SOLID
	HAIRLINE INK 2 AND REPEAT EVERY 5;
	Short form:
	AT 4,6 BOX 14 WIDE BY 4 HIGH;

3±16 HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS