Xerox Printer manual Description commands, Iresult command, Or Color

HOST FORMS DESCRIPTION LANGUAGE

IRESULT command

The color result you receive from overlapping objects is either black or color for the entire page. The IRESULT command allows you to specify the result when objects imaged with different inks overlap. The IRESULT command appears in the HFDL, FDL, and PDL OUTPUT statements and DJDE. You can use the IRESULT command only on a Xerox highlight color printer.

Figure 3±10 shows the command syntax flow.

Figure 3±10. IRESULT command syntax

								;
		IRESULT
						DEFAULT
							BLACK
					IS
							COLOR
Parameters			DEFAULT uses the printer default IRESULT, which may be BLACK
			or COLOR.
			BLACK specifies a black pixel to print when you place two
			objects with different inks that overlap, and black and highlight
			pixels coincide.
			COLOR specifies a color pixel to print when you place two
			objects with different inks that overlap, and black and highlight
			pixels coincide.
		Default	DEFAULT, if you do not enter the command.
	Examples		Long form:
			IRESULT IS BLACK;
			Short form:
			IRESULT COLOR;
			Because the IRESULT command is a highlight color command,
			the Xerox 4700 printer ignores it.
Description commands
			Once you complete the setup commands, you can use the
			following commands in any sequence to enter descriptive data:
			·	LINE
			·	BOX
			·	TEXT AT
			·	TEXT IN BOX
			·	LOGO
			·	GRAPHIC
			·	SECTION
			·	DO SECTION
			·	COLUMN
			·	INTERWORD
			·	DOT LEADER
			·	LET

3±12 HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS