Xerox Printer manual Messages, Message indicators

6.Messages

This chapter lists the error messages that appear when problems occur, an indication of the cause of the message, and the action you can perform to correct the problem.

Message indicators

The letters in the error numbers indicate the severity of the error as follows:

·E (error) indicates a syntax or similar error.

·F (fatal) indicates a serious error that can prevent you from compiling your form or may abnormally end (ABEND) your session.

·I (informative) indicates the status or activity of the system where no action is needed by the operator.

·W (warning) indicates an error in the description of your form. It also indicates the action you may be required to take to correct the problem.

XFG6001F No parameters found

Indication There were no parameters in the EXEC statement of the JCL.

There is nothing to compile.

Action Correct and recompile the form.

XFG6002F Unidentified parameter keyword <parameter keyword>

Indication The parameter keyword encountered could not be identified.

Action Correct and recompile the form.

XFG6003F Unidentified parameter value <parameter value>

Indication A parameter value entered in the EXEC statement is invalid.

Action Correct and recompile the form.

XFG6004F No FSL specified

Indication No FSL file specified in the JCL parm.

Action Modify the JCL to include the FSL you want to compile.

HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS 6±1