Xerox Printer manual XFP1029W No substitution allowed for Logo logo name

HOST FORMS DESCRIPTION LANGUAGE

XFP1029W	No substitution allowed for Logo <logo name>
	Indication	You entered the USING INK parameter in the LOGO command
		when the NO SUBSTITUTION flag was set for the specified logo
		in the logo resource.
	Action	Do not use the USING INK parameter with this logo.

XFP1030W	Can not close data base
	Indication	The compiler is not able to close the database because it is being
		used by another user.
	Action	Try again in a few minutes. If the problem persists, note the
		return code number and contact your System Administrator.

XFP1031W	Palatte name too long, using <thirty-two-character palatte name>
	Indication	The palatte name used exceeds the maximum thirty-two
		characters allowed.
	Action	None required. The system truncates the palatte name at
		thirty-two characters.

XFP1032W	Column off right of physical page
	Indication	The specified column width exceeds the physical page boundary.
	Action	Resize the column width to fit the physical page boundary.
XFP3001E	Syntax error on <command segment>
	Indication	The specified command segment contains a syntax error.
	Action	Correct the error and recompile the form.
XFP3002E	DRAW N and REPEAT AT counts disagree
	Indication	The DRAW and REPEAT AT counts do not agree.
	Action	Correct and recompile the form.
XFP3003E	N TIMES and REPEAT AT counts disagree
	Indication	The number of TIMES and the REPEAT AT counts do not agree.
	Action	Correct and recompile the form.
XFP3004E	Horizontal text inconsistent with top/bottom
	Indication	Horizontal text is aligned TOP or BOTTOM instead of LEFT or
		RIGHT.
	Action	Correct the text direction with the proper alignment.

6±8 HOST FORMS DESCRIPTION LANGUAGE 3.2 FOR IBM MVS CREATING FORMS